DIY & Lifestyle Blog

Browsing tag

DIY craft

How To Repurpose an Old Door

Don’t throw out that old door just yet! Learn how to repurpose an old door into a beautiful bathroom wall decor piece, that you will just love hanging on your wall! Do you have an old door sitting in your garage or basement that you don’t know what to do with? Why not repurpose it into a beautiful new piece of decor for your home? With a little bit of creativity and some DIY skills, you can turn that old door into a gorgeous wall decor for any room. Check out this amazing idea for inspiration! Repurpose an Old Door Do you have an old door lying around that you don’t know what to do with? Well, look no further! In this blog post, I will show you how to repurpose that old door into a beautiful and unique piece to decorate your home with. I have had this old door for quite some time. So long that my husband took it back to the garage and it got buried under some times. I asked him to go and locate it so I could finally get around to making the bathroom wall decor I had been dreaming of. If you are like me and have TONS of projects you are wanting to get done now is the time to do them. You will not regret taking the time to make something old into something new. So gather up your supplies and pull that old door out of the back of your garage or basement and let’s get started! Supplies: Old Door Polyurethane Drill Screws Wire basket Towel Hook Steps: Prep your door first by cutting the door in half, or in the best place possible to work with. Continue to prep your door by wiping it down and sanding it. Get all the excess dirt and splinters off. Scrap the door and then sand it. This makes  Once your door is sanded and clean apply a coat of fast-drying polyurethane coat over it and allow it to dry. Gather some baskets and antique hooks and work with placement on where you wish to put them. Gather some baskets and antique hooks and work with placement on where you wish to put them. Choose what you wish to have on yours. You don’t have to stick with the ones I choose.  Ideas on How To Repurpose an Old Door There are lots of different things you can do when repurposing an old door. Instead of adding items like I did above, you could paint them and stencil sayings on them. You could even decoupage the inner parts to add some floral designs.  The possibilities are endless when it comes to decorating with an old door. Get your thinking caps on and just use your creativity to make something old into something new for your home.  What Can I Make Out of an Old Door? If you are wondering what do you do when you have an old door lying around and you’re not quite sure what to make of it? Well, never fear, because I’ve got some ideas for you! Make shelves coffee tables headboard for a new bed Wall shutters Jewelry Stand Dressing screen Really any idea is perfect for crafters of all levels. So get creative and see what you can come up with using an old door. You might be surprised at just how versatile they can be! Just pin this How to Repurpose an Old Door tutorial below to find the instructions later!

Tammy Huls 0

DIY Home Decor Ideas

Finding some simple and easy DIY home decor ideas can really be a blessing. When you are wanting to change up some of your home decor and need it to be on a budget then try these DIY decor tutorials, I am positive you will love them! If you’re like me, you love to decorate your home but don’t always have the money to buy everything you want. Here are some DIY home decor ideas that will help cheer up your space without breaking the bank. DIY Home Decor Ideas I love seeing uplifting quotes and sayings in my home. They bring me so much joy and really help me have a positive attitude throughout my day. If you too love that, then these DIY home decor signs will be perfect for your home as well. When you are needing to change up your decor, you can simply make that change using some stencils, floral transfers, and a little paint. I have lots of signs that I change out throughout the year. That gives me a new look when I am wanting, and more decor items to rotate. The best thing about these DIY wood signs is they can even be used on tiered trays, cocoa bars, mantels, and coffee tables. You can find many different ways to style and decorate wood signs. Give this tutorial a try and you too will see that the possibilities are endless when it comes to some stencils, floral transfers, paint, and wooden blanks. How to Use Floral Transfers and Stencils to Make a Sign Supplies: Wood Blank, Cabinet Door, or Window Stencil with Words or Quote Vigorous Violet Floral Transfers Transfer Applicator  Acrylic Paint Jumbo Daubers Sanding Block Scissors Steps: Spread out your vigorous violet floral transfer and cut out each floral design that you want to transfer. Cut out any elements you don’t want to use. Align the stencil over the floral transfer paper to find the right placement. Trim the extra off. Pull off the backing and be careful that it doesn’t fold over and stick to itself. Stick the floral transfers onto your sign backing and use the transfer tool to press the design onto the backing. Pull back the top layer to make sure it is sticking. Remove the top layer and sand any excess off the edges. Place the stencil on top of the tile and use your deep purple paint and user your dauber to dab into the words. Take the purple flower you cut out earlier and remove the backing. Place in the lower left-hand corner and use your transfer tool to transfer it onto your sign. Pull off the plastic to make sure the transfer worked. Trim the bottom and sand the extra on the edge. How to Use Floral Transfers and Stencils on an old Window or Cabinet Door Supplies Old Window or Cabinet Door with Wooden Frame Cosmic Roses Floral Transfer “Smile” Quote – Stencil Fusion’s Bayberry Paint Master’s Touch Acrylic Paint Transfer Tool Jumbo Dauber Heat Gun/Blow Dryer Scissors  Steps: Remove the knob on your window with a screwdriver from the back. Clean the glass with glass cleaner. You can also paint the back of your window to make it all pop!  I painted mine Fusion’s Bayberry. Pick which floral transfers you’d like to use on your window and cut them out with scissors. Pull the backing off and don’t let it come in contact with itself. Place on the glass and cut off any extra to fit. Use a transfer tool and press it out to adhere to the glass completely. Pull off the sticky top and push down any transfers that didn’t release and adhere to the glass. Push out any air bubbles. Once you’ve added your floral transfers, if you want to add any extra transfers to the piece, just cut out from your paper and repeat the same process to adhere the transfer to the glass. Be careful not to scratch any previous transfers. Place the stencil onto the glass where you would like it. Use the dauber to dab your paint into the words. Remove the stencil and wipe off any extra paint. Use the blow dryer or heat gun to dry. Place the stencil back onto the glass where you previously painted and offset it just a little. Use a white paint to go over the letters and make them pop. Just pin this DIY Home Decor Idea tutorial below to find the instructions later!

Tammy Huls 0

How to Make a Decorative Tray

Follow along step by step as I show you how to to make a decorative tray out of a plain old cutting board or any piece of wood. This tutorial will make you think twice about any old piece of furniture after you see what I did.  As we all already know there is not a piece of wood that I don’t love. I am sure you are wondering why. Well, because I can make adorable DIY trays out of any piece of wood or even a cutting board like in this tutorial! I just absolutely love being able to create my own home decor exactly how I want it. I bet you feel the same as I do. Or else, why would you be here? How to Make a Decorative Tray To me, there is always something pretty to create from repurposed wood or even furniture. This DIY project is simply painting it, adding stencils, a transfer and handles. Yep… you read that right. It IS that easy. There are so many possibilities to make this unique piece. So if you are like me and love to make new things out of anything, then this project is perfect for you. The beauty of this tray project is that you get to choose what fits your taste best by finding the perfect transfer and stencils. Maybe florals and French script aren’t your thing. No problem. Choose whatever your heart desires. That is just fine. You do you, and just remember that whatever you create, is awesome! The steps are the same no matter your style. Have fun with it, from start to finish.  What you need to make your decorative tray: An old cutting board Fusion white paint  Algonquin paint Black paint Paint daubers Paint brush Blow dryer A French script stencil A fine sanding block Family over everything stencil 2 x tray handles Floral transfer How to make your decorative tray: Start with your cutting board and paint it white. Use a blow dryer or heat gun to speed up the drying process. Paint another layer of paint onto the cutting board. Use your blow dryer again to dry it faster. Determine which stencil to add on top of your wood piece. Lay your stencil down on your board, paying attention to the sides and spacing. Always have a visual plan before you start adding your paint. With your pouncer, begin to press your Algonquin paint gently into your stencil in the desired areas you choose. Once you are done filling in the stencil, pull it up carefully. If by chance you go over a bit, you can use a baby wipe to help you clean up that area while it is still a bit wet. Use your blow dryer to dry the paint. Take your sanding block and buff at the script. Take some more white paint and lightly brush the script to fade it.  Use your blow dryer to dry the paint. Determine where you are placing your floral sticker. Add your sticker to your board. Determine which stencil to add on top of your wood piece. Lay your stencil down on your board, paying attention to the sides and spacing. Always have a visual plan before you start adding your paint. With your pouncer, begin to press your black paint gently into your stencil in the desired areas you choose. Once you are done filling in the stencil, pull it up carefully. If by chance you go over a bit, you can use a baby wipe to help you clean up that area while it is still a bit wet. To complete, add your handles to your tray. How to apply a transfer? Have you ever seen a really cute saying or graphic and wished you could put it on everything? Well, there’s good news: with a little bit of patience and some basic tools, you can apply transfers to basically any surface! In this how to apply a transfer tutorial I will show you how it’s done. So go find your perfect transfer, and let’s get started! How to use a stencil? I just love using stencils when it comes to crafting and making home décor. I get asked a lot what are the best stencils to use and also how to exactly use stencils in different projects. In this this post I share all the tips and tricks I know with you when it comes to how to stencil. Just pin this DIY decorative tray tutorial below to find the instructions later!

Tammy Huls 0

How to Use Decoupage Paper

When I get new supplies in, I get so excited. Just plain giddy, really. I just have to craft with them as soon as I can. These projects are the direct result of new, amazing decoupage papers that arrived at my home last week. So naturally, I would want to share these easy DIY projects with you as well so you can have fun too! Are you ready to learn how to use decoupage paper? Make your Wood Signs Using Decoupage Paper Y’all, why is learning how to use Decoupage paper so important in your crafting skills bank? Well, let me tell you! These wooden signs are super cute, simple home decor. What makes decoupage even more special are ALLLLLL the ways you can work with it. After crafting these signs, you should consider using this strategy to refinish an old side table. Maybe you could even redo the drawers on a big dresser for a fresh new room makeover. So many ideas, but still the same simple steps. These wood boards, of all sizes, are so easy to work with in terms of DIY home decor. The best part of this project is that it is completely customizable. You decide the style of design, size, colors, and shape for your wood sign. The hardest part is deciding which paper to use, because man oh man, they are all so awesome. Whether it is raw wood or painted wood it doesn’t matter.  A transfer sheet of florals or vintage numbers… also no big deal.  You decide what fits your home decor best to get this project started. I love being able to create something for any space in my home with just a little bit of time, creativity, and desire. You will too. And with these steps, you will see just how easy it is to get this same look in less than an hour. Are you ready to get to work?  Supplies: Blank piece of wood any size –  either raw or painted wood Decoupage Paper – Roycycled Mod Podge Paintbrush Sanding Sponge Heat gun Sponge Daubers Minwax Polyurethane Spray How to Use Decoupage Paper Grab your piece of wood, raw or painted, and your style of decoupage paper. Based on the size of your wood, will determine how much you will use of your paper and Mod Podge.  Place paper over the top of your wood to determine the amount of paper you need to cut from the main sheet. I don’t measure, but you can. You just need enough to cover the entire board with a bit of overhang. For your bigger pieces of wood, you might not even need to cut your paper at all.  Apply a nice even coat of Mod Podge. Be sure to go all the way to the edges. Completely cover the top of your board. For larger boards, you will need to work in sections, starting from the top, working your way down.   Next grab the piece of decoupage paper you like, playing with placement before you lay it down officially. Remember, once it touches, it is very difficult to pull back up, so make sure you have it where you want it!  Place it down, rubbing smoothly with your hands to push out any air bubbles. Make sure it completely adheres to the wood.Larger boards, you will repeat the addition of Mod Podge, applying paper, and smoothing out air bubbles in sections as you work to complete your wood sign.  Let dry completely before removing the excess tissue paper with a sanding sponge. Simply rub along the edges to easily pull off excess.  Grab your paintbrush and Mod Podge, and apply a thin coat on top to seal it up. Remember to keep your brush strokes all going the same direction. Let dry completely.  What If My Wooden Sign is Not Super Smooth? Wood scraps are almost always not super smooth, and when working with these decoupage papers, you really want to find a piece as smooth as possible. But you can always take away the rough texture with a sanding sponge to help. You want your decoupage paper to really adhere to the wood. So, be sure to get full coverage of your Mod Podge on your board. You want it to really soak into those grooves. These projects are easy, and mistakes happen. Believe me. But I know you can always disguise a mistake in some way. So just be brave, try, and have fun.  What if I Didn’t Measure Right and Now an Edge is Showing Through? Y’all I can’t tell you how many times I have done this. Well, because I told you before… I don’t measure. I like to eyeball my projects and most times that is just fine. But every once in a while, it is not. When that happens, I simply disguise it by “dirtying” up that edge of my wood sign by lightly rubbing a black ink/paint sponge along the edges. You can make the line as thick or as thin as you want. This will also give it a more finished look so that little mistake turned out to be a blessing. Working with decoupage paper is so much easier than it looks. These steps are so simple. Here is the abbreviated version for y’all! Pick wood. Pick paper. Paint if you want. Mod Podge. Place paper. Rub. Mod Podge. Dry. Decorate your home with this beautiful new DIY decor! HA! So simple and so cute. Let me know what you think! Just pin this How to Use Decoupage Paper tutorial below to find the instructions later!

Tammy Huls 2

How To Stencil Your Own Projects

Stencil your own projects to make your own home decor in little to no time. Follow along as I teach you all the tips and tricks that you need to know about stenciling a wood sign. Stenciling Your Own Projects To stencil, your own projects are so simple, and can actually be a bit sassy.  Hence the stencil, “We Don’t Hide Crazy.” HA! They are also pretty budget friendly. And did I mention how you could easily complete a few of these projects, from start to finish, in less than an hour? Doesn’t all of that sound a little too good to be true. So once you have the wood, the metal, the paint, and the stencils, you are ready! I know I am ready to teach you. I am so glad you are here with me as I share my tips and tricks for getting this look for your own desired space wherever it may be. Let’s get started! Learn to Stencil Your Own Projects So many pieces of wood/metal and so many stencils that are just screaming for you to show them some love! And I am here to give you that little bit of encouragement to love them. I am happy to inspire you to work with them. I am excited to teach you step by step how to properly take that piece of wood/metal and a fun stencil from boring to beautiful in little to no time. Painting and stenciling projects is such a simple way to dress up any space in your home, office, camper, classroom, WHEREVER! Follow along as I walk you through this customizable DIY craft that will leave you excited to make many, many more! Picking the perfect paint color for your base coat and your accent color is the easy part. The hard part is determining which exact stencil you love the most. Believe me, when I say, there are just so many great stencil options out there to choose from. Don’t worry though, once you have become a master at painting and stenciling your own signs, you won’t want to stop. So if you happen to make one for every room in your home with just a piece of scrap wood or metal tin, that is fine. These projects make perfect gifts for friends and family. So you can keep on painting and stenciling for as long as you want! Are you ready to give it a try? Grab your supplies and let’s go! Supplies: Wood board panels Metal Tin “Number Stencils” Stencil “God Bless America” Stencil  “We Don’t Hide Crazy” Stencil “I Pledge Allegiance to The Flag” Black, Tan, White, Gray for base coat  Master’s Touch Acrylic Paints – Black, Warm Gray, Titanium White, Dark Brown, Red  Dixie Bell Satin Clear Top Coat Sander  How to Stencil Your Own Projects Grab your wooden board scrap wood and apply a base coat, covering completely. Don’t forget your sides to give a finished look. You can stain your wood or leave raw, if you prefer this look instead. Use a blow dryer or heat gun to speed up the drying process.  Determine which stencil to add on top of your wood piece.  Once dry, grab your desired color(s) for your stencils by squirting on a plate.  Lay your stencil down on your board, paying attention to the sides and spacing. Always have a visual plan before you start adding your paint.  With your pouncers or finger daubers, begin to press your paint gently into your stencil in the desired areas you choose.  If you are adding multiple colors to your sign, determine which colors to add first and complete all of those desired sections before moving on to your next color.  Once you are done filling in the stencil, pull it up carefully.  If by chance you go over a bit, you can use a baby wipe to help you clean up that area while it is still a bit wet.  If you want to add some texture detail to the sides of your sign, simply sand a bit or add some black edging with your paint dauber.  To complete, spray your board with a minwax polyurethane spray. Certain thin wooden signs can have 2 holes drilled up top so you can add twine to allow for these stenciled signs to be hung. This makes it so they are not just resting on a mantle or bookshelf. Don’t you just love options? How to Add a Stencil to a Metal Tin Keep your patina look or paint if desired. I like it as is personally. Tape your “God Bless America” stencil in place, since it is on a curve using blue painter’s tape.  With your pouncers or finger daubers, begin to press your dark brown paint gently into your stencil phrase on your metal tin.  Use a blow dryer or heat gun to speed up the drying process. Once you are done filling in the stencil, pull it up carefully.  You do not have to apply a sealer over the top of the metal. Do You Have To Tape Down Your Stencils? Y’all I do not ever tape down my stencils when I am working on a flat surface, because I like to cheat as I am stenciling. Sneaking a peak as I add the paint lets me know if I need to continue or make any changes while I am crafting. But when working on a round surface like this metal tin, I used tape to keep me straight and sturdy throughout the process. Sometimes a little bit of tape is a good thing.  What Are the Must Have Colors to Have to Stencil my own sign? If you have been here for a while, you know I am a neutral kind of gal, through and through. So my answer to this great question is super easy. Neutral colors are my jam! I use dark browns, black, white, and grays in multiple shades for most of my projects. That does not mean you have to. From time to time I will pop in some bold funky colors, and I promise they turn out just as cute! I like Ocean Green and Lake Blue from Master’s Touch at Hobby Lobby for a beachy vibe. Just have fun and be creative whatever you decide. The best part of stenciling is if you don’t like it, just paint over it and try again! These crafts are pretty forgiving, and customizable projects which makes them so wonderful. Wouldn’t you agree? Just pin this how to stencil your own projects tutorial below to find the instructions later!

Tammy Huls 0

How to Decoupage a Wooden Toolbox

Follow this tutorial to learn how to make your own rustic decor by learning the technique of using tissue paper to decoupage a wooden toolbox. Y’all know of my love for the Farmhouse look in my decor. My whole house is covered in it. Well, I have really started to open my heart a bit and take a chance on a new style. Lately, I have really been into the Industrial Grungy looking stuff. There is just something about it. I think it is because it still has the natural vibes of Farmhouse, but a bit more masculine feel. And this DIY Decoupage Wooden Tool Box is too great not to start loving the Industrial look. Don’t you agree?  How To Decoupage your Own Wood Toolbox This wooden toolbox is pretty awesome on its own, but I had a vision. And it’s not wise to stop a woman when she has a vision. Am I right, y’all? Using just a bit of Soft Matte Gel and this decorative decor tissue paper helped my vision become a reality. This DIY craft was so simple! Just because it is a tool box, doesn’t mean it has to have that masculine vibe. I just happen to love that look right now. But I’m here to tell you that if you want to make this with a different style to match your home decor, that is just fine. If you hope to keep its overall function as a wooden toolbox, you can do that too! You can accomplish both with any style of paper you select! You just have to be willing to do it! I’m here to teach the process to create it, step by step. Ultimately though, you have the opportunity to complete it in a way that best fits your style. So whatever style that might be, go and grab your supplies. I’m so excited to teach you how to make your own Wooden Tool Box using this awesome technique of Decoupage. If you want to have a rustic look in your home or office, then follow these steps below to get started!  Supplies: Old Wooden Tool Box Decorative Decor Tissue Paper – “Science Lovers” (Your choice for design)  Soft Matte Gel  White paint Paint Brush Sanding block Flat edge applicator tool How to Decoupage Your Wooden Toolbox Grab your old wooden toolbox, Soft Matte Gel, and decorative tissue paper of your choosing.  Wipe wood clean of any grit or grime. Lay your paper on your wooden toolbox and determine where you want the images to rest best. Trim your paper with scissors for the amount to cover a side. Leave some excess. Apply a thin layer of your soft matte gel directly to your wooden toolbox. Carefully apply an even coat covering the entire area you wish to add your paper. Be extra careful as you add your tissue paper since this paper is so fragile. Do not let it accidentally hit in a spot you don’t want it to remain. Next, apply your decoupage tissue paper. Press firmly and smooth out any air bubbles as it adheres to the wood. You can use parchment paper or wax paper to ensure every part is adhering perfectly. Be careful!  Let dry and sit overnight. Once completely dry, grab a sanding disc to rub off any excess of your tissue paper. Next, use your sanding block to smooth the sides of your paper on the edges of your wooden crate. Wipe clean of any debris.  To seal this project, apply a thin coat of your Soft Matte Gel directly on top. Apply evenly.  Let sit to dry when complete. What is the Difference Between Decorative Tissue Paper and Decorative Decor Tissue Paper? The tissue paper that we shove into gift bags is extra fragile, right? Well, so is decorative tissue paper, friends. Your fingernails can snag it so easily, so you have to be extra careful when working with it. That is not the case when working with Decorative Decor Tissue Paper. That style of paper is much more sturdy and easily shapeable. I love how forgiving it is, and sometimes y’all when I craft, I make some mistakes. And I love those happy little accidents. You should too!  Can You Paint the Wood Underneath? With this project, I did NOT decide to paint the wood underneath. I wanted to keep the wood grain showing through on my decoupage paper to help maintain the industrial vibe I was going for. But, if I was looking for a more shabby chic design, then yes.  I would have selected a different design/pattern of decoupage paper to really pop on my wooden surface. So in that case, I would totally paint a coat on my wood. I would remember to let it dry completely before applying my decoupage paper. But all the other steps would remain the same. The fun thing about decoupage paper is that the options are endless when it comes to creating your own DIY projects. Just pin this How To Decoupage your Own Wood Toolbox tutorial below to find the instructions later!

Tammy Huls 0

DIY Breast Cancer Sign using Transfers

Making your own DIY Breast Cancer signs is a wonderful way to show your support to anyone who needs some hope in their lives. With this step-by-step tutorial, you can make your own signs as a reminder to give hope to a loved one or yourself. DIY Breast Cancer Signs Making a Breast Cancer sign that brings awareness to breast cancer and is simply beautiful too, is just plain awesome. I can’t get enough of these pink shades and messages of hope! Crafting these with that someone special you know in mind, makes them even more special. Whether you or someone you love is a current fighter or a proud survivor, this DIY project is for you. You only need a few things to make this look! Grab some pieces of wood, some paint, some stencils, and these beautiful transfers to get started. To see exactly what I did to make these adorable and meaningful signs, check out my tutorial below. In under an hour, you will have 2 new signs to decorate your home with or give as a gift to someone needing an emotional uplift.  Make your Own DIY Breast Cancer Sign I miss my grandma every day. And when I craft these, I think of her. She was beautiful and always had hope. She always was able to brighten my days because she was so special. These signs help her spirit live on for me.  Using these big beautiful floral transfers, along with the stencils about hope, are perfect to brighten anyone’s day. I know they do mine. Being able to craft something so personal makes me happy. Determining which flowers to use, colors to paint, and stencil to apply makes these signs even more heartfelt. If you need this sign for your own home, or for a friend, check out the steps below.  Supplies: Wood Board Panels Basecoat of your choice of color paint – Pink Heat Gun Master’s Touch Light Pink, Darker Pink & White Hope with Ribbon Hope Definition Stencil Flat edge applicator tool Lush Floral I Transfer by Prima Paintbrush Finger Daubers Minwax Polyurethane Spray How to Make A DIY Breast Cancer Wood Sign Grab your wooden boards and apply a base coat of pink paint. Dry completely. Use a blow dryer or heat gun to speed up the drying process. Once dry, play with the placement of stencils and transfer to create a visual plan on your first “HOPE with Ribbon” sign.  Grab your pieces of floral transfer and apply them to your wooden sign. Use your flat edge tool to adhere to the wood. Be careful when applying your transfer because once it sticks it on there.  Carefully remove your plastic backing slowly as you work. Next, let’s add the “HOPE with Ribbon” Stencil.  Grab your desired color(s) for your stencils by squirting on a plate. I am using a slightly darker pink than my base coat to stencil first. You could leave it as is if you like the subtle look.  With your pouncers or finger daubers, begin to press your paint gently into your stencil. Dry your paint before moving on to the next step. I want my stencil to really pop, so I am laying the stencil back over, shifted just a tad. Add some white paint on your stencil, leaving the pink ribbon alone.   Go back in and add more floral and leaf transfers to fill in the opening up top. Repeat using the same steps as before to apply your transfer.  Set aside to get started on your other Breast Cancer Wood Sign. Bring over your next pink board to begin adding your details.  Determine which floral transfer pieces you want to add to your board – cut out from your main sheet. Remember to be careful to not let your transfer get ruined by touching anything with the back paper removed. For this sign I will build up my transfers a bit more by layering with the pieces up top on my board.  Once you have created a visual representation of what you want your board to look like as a finished product, begin with your first transfer. Apply your transfer by resting in place, and pressing firmly with your tool so the transfer adheres nicely.  Repeat as you stack all of your transfers on your board.  Don’t be afraid to layer and have fun with it. Stack them around on your board. Feel free to snip and shift your transfers before you make a final decision as to where to lay them. To finish up, grab your “Hope Definition” stencil, and with your finger daubers add your darker pink paint first. Repeat the steps from above to dry, then reapply your stencil to add your next layer of white paint.  Once finished with these signs, apply a spray polyurethane to help these cute signs to have a finished look.  Do Transfers Always Need to be Sealed? The answer is yes and no! For these wooden signs, you should definitely seal these to give them a finished look. You worked too hard to have them not look extra fabulous y’all. I like to use whatever is hanging around my craft room if I am being honest. But what I use most to seal my projects is either Dixie Bell or the Minwax Spray Polyurethane. I DO NOT seal my transfer when applying them to the glass of an old window. Doing that will ruin the transfer. How Many Projects Can I Make with a Transfer Sheet Set? With this transfer sheet set, I have already made 5 projects and I am nowhere near using it all up. With these 2 Breast Cancer Wooden Signs, I was hoping it would help me dwindle down my stash. But, I still have so much leftover. That is why I love these transfers. You get so much product for your to work with. Creating wooden signs of all sorts of sizes is a cinch. Old windows look great with these transfers on them, as well.  Oh, and these beautiful flower transfers would also look beautiful on any old piece of furniture you want to upcycle. So to answer that great question… the possibilities are endless! Too many to count! Just pin this DIY Breast Cancer Sign tutorial below to find the instructions later!

Tammy Huls 0

How To Make Funny Signs for Home Decor

Learn how to turn your craft abilities into a little humor for home by making funny signs using stencils and paint that you will not be disappointed in. Y’all. If you like to giggle and craft, then this post is for you. I have a pretty big sense of humor and love anything that can make me smile. These DIY Funny Signs are just too cute and comical to not craft. They are bound to make any guest who stops by your home smile, and that is always my goal. You know you giggled when you read those signs. Don’t deny it!  I will be honest. I didn’t love how thin these pieces of wood were when I ordered them. But I sure am loving them now. They are so thin and light that I can easily poke holes right in the top. Then all I have to do is simply attach some twine to be able to hang these cute DIY Funny Signs anywhere I want in my home. And don’t worry y’all, if you don’t have these exact pieces of wood, they turn out just as cute with any piece of scrap wood, some paint, and an adorable stencil. So if you want to create this look for your home too, grab your supplies, and let’s get started.  Make your Own Funny Signs For Home So what do you think about these stencils? Aren’t they just so funny? They definitely bring a smile to my face! AND crafting with them to make a comical DIY for my own home, just makes them even more special. I decided to stick with my neutral color palette so it would fit in with the rest of my farmhouse decor. But you don’t have to! With a craft like this, you get to determine the size of your wood, the colors, and the amount of detail. The best part is I did it all with some supplies I have had on hand. (I ordered a big bundle of those wooden boards from Amazon.) Pretty great, right? Let me teach you how to create these signs from start to finish. Just check out these simple steps below!  Supplies: Wood Board Panels Basecoat of your choice of color paint – light tan/cream & black “Please Excuse The Mess” Stencil “You Drink Too Much” Stencil – The Stencil Smith Finger Daubers Heat Gun Jute Twine Electric drill How To Make Funny Signs for home decor Grab your thin wooden boards and apply a base coat of paint. You determine the color(s) that works best for your decor. I went with a light tan for one and black for the other. But you do what looks best for your decor. Dry completely. Use a blow dryer or heat gun to speed up the drying process. Once dry, grab your desired color(s) for your stencils by squirting them on a plate.  On our first DIY Funny Sign, carefully apply your stencil, “You Drink Too Much” in place on your board. I used my light tan board for this sign. With your pouncers or finger daubers, begin to press your paint gently into your stencil. I just used black for the letters for this sign. Once complete, gently remove your stencil.  Add some dimension to your sign by running your finger daubers along the sides. To me, it looks a bit boring without it. Set aside. Bring over your next board. I painted my board with a black base. I used the light tan to add lettering with my stencil.  Repeat the steps from above to add your next stencil, “Please Excuse the Mess” for your DIY Funny Signs Set. When dry, poke two holes into the tops of your boards using a tiny drill bit.  Use a jute/twine/leather cord to pop through holes. Create a hanger for these DIY Funny Signs to be displayed in your home for all to admire.  Should You Use Just One Color When Filling In A Stencil? For these signs, I did just use one color for the whole sign. But you do not have to! You can mix and match as many colors as you want. Since I prefer the more neutral colors in my home decor, I tend to stick to that color palette. But y’all do not have to do that. Just have fun and enjoy the entire crafting process, whatever it might be. ANNNNND, the beauty of a stencil is if you don’t like how it looks, no big deal. Just repaint and start from scratch!  What To Do If Your Sign Looks a Bit Boring? Y’all! I am a fan of sweet and simple when it comes to some crafts. But I don’t ever want my project to look unfinished. That is why I love the distressed look so much. (Ha, that explains why I do it so often.) To get that look, just run a bit of black paint on your finger daubers along the edges of a sign. Don’t push too hard, as you are just adding a new dimension to your sign. Sometimes I even use a sander to roughen up the edges too. Just remember not to go too crazy when distressing friends. Let me know what you think of this technique. It is an easy way to boost your boring sign to something beautiful. See you next time! Just pin this how to make funny signs for your home tutorial below to find the instructions later!

Tammy Huls 0

DIY Distressed Wood Signs

In this step-by-step tutorial, I will teach you, from start to finish, how to make your own DIY Distressed Wood Signs. Scrapwood, paint, stencil, and a sander are all you need! If you are wanting this same adorable look for your home, let me walk you through it!  There is not a piece of wood that I don’t love. No matter the size or shape, I LOVE it. Why you might ask? Well, because I can make adorable DIY Distressed Wood Signs with any piece of wood. So why wouldn’t I love it? Being able to create my own home decor exactly how I want it makes me happy. I bet you feel the same as I do. Or else, why would you be here? DIY Distressed Wood Signs I told you I love wood, but I did not tell you how much I love stencils, yet! I LOOOOVE stencils. Stencils are the best way to select your style, size, and overall satisfaction when creating a DIY Wood Sign. The best part is that all you need is a piece of scrap wood and a stencil of your choosing. I love The Stencil Smith personally, but really any stencil will be just fine. Next, just determine your paint colors, and you are set. You too can make your own home decor to match your style by following these steps below.  Supplies 18×12 & 16×12 wood boards Black – Fusion Mineral Paint Master’s Touch Acrylic Paints – Warm Gray (Tan) “What I Love Most About My Home” Stencils – from The Stencil Smith  “Hangry” – from the Stencil Smith   Minwax Fast Drying Polyurethane Clear Satin Sander – 220 grit How to Make Your DIY Distressed Wood Sign Grab your large wooden rectangular boards. You determine the sizes. Apply a coat of black paint all over your entire board. Don’t forget your sides to give a finished look on both boards. Use a blow dryer or heat gun to speed up the drying process.  Once dry, grab your desired colors for your stencils by squirting them on a plate.  Lay your stencil down on your board, paying attention to holding it in place as you work.  With your pouncers or finger daubers, begin to press your light-colored paint gently into your stencil. With a large stencil, I start at the top and work from left to right. Once you are done filling in the stencil, pull it up carefully.  Allow your sign to dry completely before moving on. To get the distressed look, grab your sander with 220 grit. Simply go along the edges of your sign, being careful not to do too much. It will remove the paint that you placed at the beginning of the craft. Wipe debris clean. To seal your sign, add a layer of Minwax Fast Drying Polyurethane Clear Satin starting from the bottom of your sign. Going in lines from left to right to ensure you have complete coverage all the way up on your board. Follow directions on the can for how far to hold the can from the board.   If you wish to hang your sign, attach the hardware to the back.  How Do You Determine What Size of Wood to Use? I do not have a fancy pants answer for this. And you might even laugh at my honesty. But when I want to make a sign, I do 1 of 2  things. One option is, to find a stencil that I want to use. Then I will hunt down a piece of scrap wood that will fit nicely. The other option is if I already have a piece of scrap wood the size I want,  I stick with it. Then the hunt begins for a stencil I can add that will fit. Ha! I told you it was not a fancy pants answer. I believe in working with what you got and enjoying every minute of it.  Which Thickness Is Best When Working with Stencils? If anyone ever tries to tell you thickness doesn’t matter, they are wrong. I love to use the 7 Mil Mylar Options when I am working on a smaller project. They are sturdy enough for a limited area to stencil. But if I am stenciling a large sign, I always buy the 10 Mil Mylar Option. They are sturdy. They will last. And, they are easier to take care of so you can use them time and time again. To be honest though, if you take your time when stenciling, you can use either. Just pin this DIY Distressed Wood Signs tutorial below to find the instructions later!

Tammy Huls 0

DIY Farm Signs

Get ready to fall in love with these DIY farm signs that are super simple and perfect for any farm decor you are going for. These DIY Farm Signs cover all the aspects of that hardworking lifestyle and adorable decor. Whatever you are, farm or city folk, these signs are perfect for that farm lifestyle you love to live. Or you are longing for in your daily life. From “Farm Sweet Farm”, “Cluck Oink Moo”, and “Tractors.” Let me be very clear with you from the beginning about farm living! It is not easy y’all! Rising early, resting late. Down and dirty from dusk to dawn. But… These DIY Farm Signs… They are NOT HARD at all! These farm-themed stencils and transfers are just the best. So with just a few supplies, some time, and my step-by-step tutorial, you can have these Farm Signs as your new decor with little effort. And I will say it again. There is not much on the farm that requires little effort. So are you ready to get to work? Make Your Own Farm DIY Signs  At first, I was a bit bummed at how thin these wood signs were when I got them in the mail. I remember being frustrated that I wasted my money. But y’all, they are so PERFECT for this DIY craft using stencils. They are so lightweight, that easily adding the hanger was not too much work at all. I love that this set of 3 signs can all be hung on one wall of my home, or throughout it. No matter where I place them, they will look good. They will keep the Farm theme and decor consistent no matter the space. That is what I want for my home. I want it to truly feel like the sign says, “Farm Sweet Farm.” Supplies: Wood Board Panels Algonquin Paint “Farm Sweet Farm” Stencil “Cluck Oink Moo” Stencil Farm Life Transfer “Tractor” Stencil Transfer Tool Master’s Touch Acrylic Paints – Black & Red Finger Daubers Sander Jute Cord Electric Drill How To Make Your Own DIY Farm Signs Grab your thin wooden boards and apply a base coat of paint. You determine the color(s) that works best for your decor. I went with a light tan because I am a neutral kind of gal. Dry completely. Use a blow dryer or heat gun to speed up the drying process. Once dry, grab your desired color(s) for your stencils by squirting on a plate.  On our first DIY Farm Sign, Apply your stencil, “Farm Sweet Farm” in place on your board. With your pouncers or finger daubers, begin to press your paint gently into your stencil. I just used black for this sign. Once complete, gently remove your stencil. Set aside to get started on your other DIY Farm Signs. Bring over your next tan/cream board to complete your 2nd DIY Farm Sign.  Determine which farm animal transfer pieces you want to add to your board – cut out your chicken, pig, and cow!  Remember to be careful to not let your transfer get ruined by touching anything with the back paper removed. Once you have created a visual representation of what you want your board to look like as a finished product, begin with your first transfer. Apply your transfer by resting in place, pressing firmly with your tool so the transfer adheres nicely.  Repeat as you stack all of your transfers on your board. I love the chicken wire accent all throughout.   To finish up, grab your stencil and with your finger daubers add those cute animal  saying sounds to add some fun to your DIY board.  Don’t be afraid to layer and have fun with it.  For your 3rd DIY Farm Sign, determine your tractor color. I chose red, but you do what you like best.  Begin to add your paint colors, determining what words you want to pop with more attention. Be extra careful since this stencil has so many tiny spots that would allow for bleeding through. Use a finger dauber to help with this! Apply that distressed look on your outer edges of the sign. Use a baby wipe to help if you add a little too much in one spot. You could even sand down those edges too if you prefer that look.  Once finished with these signs, apply a spray polyurethane to help these cute signs to have a finished look.  When dry, poke two holes into the tops of your board using a tiny drill bit.  Use craft leather cord to pop through holes. Create a hanger for these DIY Farm Signs to be displayed in your home for all to admire. What is the Difference Between a Finger Dauber and a Pouncer? I love them both so much, and they might not seem like they are different, but y’all, they are. The finger daubers are best for tiny areas to stencil. Those areas that don’t have a lot of negative space between the images or lettering are best stenciled when using a finger dauber. Projects with multiple colors being stenciled are easily accomplished with a finger dauber, as well. A pouncer is foamier and has a larger area to allow more paint coverage to be used on signs that may only need 1 color. I like to use them also to create the perfect round polka dot too for certain projects. But to be honest, sometimes I will just use what is around because that is just my style. Ha! Give them both a try…I sell both. What Paint Should I Use When Stenciling? When I am stenciling, I have always really loved to work with Master’s Touch from Hobby Lobby. It only takes 1 coat and I love how easy it is to finish a craft. But, that doesn’t mean that I don’t use other brands of acrylic paint. To be honest y’all, my crafting style is mostly, use what is around. On these boards, I actually used some old furniture paint for my base coat because it was open. No one will know what you are using, if you just use whatever it is, well. Don’t go using finger paints now… stay smart, not a smart alec. Just remember to have fun with and be creative.  Just pin this DIY Farm Signs tutorial below to find the instructions later!

Tammy Huls 0

DIY Campfire Sign

This cute, not-so-little, DIY Campfire Sign is perfect for anyone who enjoys making memories around a campfire. So keep reading as I teach you how to make your own with this step-by-step tutorial. Are you a camper or a glamper? I go back and forth when I think of how I would classify myself. I loved growing up camping as a kid, but I do enjoy the luxurious camping that we have become accustomed to in my adulthood. And with every experience, the campfire is always my favorite part of it all! So if you consider yourself a true down and dirty camper… or a luxurious nature love glamper, you will love this project. DIY Campfire Sign Using Stencils This stencil is big and bold, much like you want your campfire to be. I love how the black wooden base really helps those letters pop. The use of multiple colors within the fire seems to really make it sizzle! I can almost smell the smoke, can’t you? Stencils are such a fun and easy way to create a DIY sign for any reason, any holiday, and any decor. And yep, camping is for sure something that should have a cute sign to represent it! Are you ready to hit the next campground, or at least craft pretending that we are? I am! This sign is one of my favorites and a top seller too! It is just so fun, so big, and so bright. Everyone loves camping. Maybe some do not enjoy the dirt and smoke, but they most assuredly love the conversations that come out around the campfire. It is always the best part. This DIY sign is perfect for anyone who loves that special experience. The best part is that you don’t need much to make this craft. Just this 1 stencil, a few colors of paint, and a large piece of wood is all it takes. You can even make this amazing sign in less time it would take you to actually build a campfire. You believe me. Let’s give it a try! Supplies: Wood Board – 1×12 or big enough to fit your large stencil Black Paint – https://flippinfurnitureshop.com/products/coal-black-fusion-paint “What Happens around the CAMPFIRE” Stencil – https://www.thestencilsmith.com/products/2357-what-happens-around-the-campfire?_pos=3&_sid=91f244522&_ss=r&variant=33619318833292&aff=6  Acrylic Paint – Master’s Touch Acrylic Paints – Dark Titanium White, mustard, tan, brown, orange, and red – https://www.hobbylobby.com/Art-Supplies/Painting-Supplies/Acrylic-Painting/Titanium-White-Master’s-Touch-Acrylic-Paint—4.1-Ounce/p/8406 Dixie Belle Satin Clear Top Coat – https://amzn.to/3wDKf8U Sander  Minwax Polyurethane Spray Steps to Make your DIY Campfire Sign Using Stencils Grab your large wooden rectangular board. Apply a coat of black paint all over your entire board. Don’t forget your sides to give a finished look. Use a blow dryer or heat gun to speed up the drying process.  Once dry, grab your desired colors for your stencils by squirting on a plate.  Lay your stencil down on your board, paying attention to the sides if you have a tight fit like me.  With your pouncers or finger daubers, begin to press your paint gently into your stencil in the desired areas you choose. I start with white. Once complete, use your mustard color to fill in the words CAMPFIRE. You can use the same pouncer or finger dauber  Next grab your tan color and mix in a bit of brown to fill in your logs and sticks on board.  To finish up our stencil, the fire is next. I layer colors of the mustard, orange, and reds to make the fire really pop. Play with placement as you add, remembering to be creative.  Brighten it up where needed by going over in spots you desire, especially on outer edges of fire. Don’t go overboard! Once you are done filling in the stencil, pull it up carefully.   If you want to add some texture detail to the sides of your sign, simply sand. Finally, spray your board with a Minwax polyurethane spray. What Colors Are Best to Start When Working with a Multi-Colored Project?  Y’all this is such a great question. I am all about working smarter, not harder. So, paint choice for me is one way to be smart from the start! I always begin with my lightest color of paint first. That way, I can reuse the same paint pouncer or finger dauber for the entire project. You know I am not wanting to go wash out that paint as I craft… ain’t nobody got time for that!   Do I Have to Use a Finger Dauber? I will be honest with y’all. I love me a good finger dauber. They are my very best friends when I stencil. I also enjoy using a pouncer too, from time to time. Although some people even use makeup sponges when they stencil. I don’t have the best of luck using those, but others do! I am here to tell you, to use whatever you have. Remember, think smarter, not harder. All that matters is that you are having fun, and you enjoy the process. Oh, and that you love the final product too! Just pin this DIY Campfire sign tutorial below to find the instructions later!

Tammy Huls 0

Upcycle a Window Using Transfers

With a beautiful transfer sheet like this Farmers Market Truck Canvas from Prima, you just can’t go wrong when choosing to upcycle a window using transfers. Window frames are some of my favorite pieces of old furniture to decorate with. I love that they come in all different shapes. Ok, ok, mostly just squares and rectangles, but they also come in so many sizes. Big ones, small ones, medium ones, ones with and without panes. I love them all. And you know me, I hate to see anything that is old not become new, purposeful, and beautiful once again. So old windows are simply wonderful to upcycle in the easiest of ways!  Using Prima transfers is a great way to add some character and charm to an old window. Honestly though really, any transfer is a good transfer in my opinion. They take patience and sometimes a bit of practice. But, man oh man, are they worth it. Remember when I used transfers to update my hutch? I love how they are so easy yet make such a big change! How To Upcycle a Window Using Transfers I have had this transfer sheet for years and am so glad that I finally put it to good use. The vintage, farmhouse vibe, with that filigree accented text is just beautiful. I especially love how it pops on the window, thanks to a helpful trick I will happily teach you in this tutorial. So are you ready to learn the easiest way to Upcycle an old window? Do you have this transfer sheet or one you love more, that you have been dying to try out? Are you ready to get crafting, making something old become beautiful once again? If you said yes to all of these, I am so excited! Let’s get started.  Supplies: Old Window Frame with Glass Fresh Flowers Transfer – Prima Beautiful Things Transfer – Prima Sander Transfer Sheet Applicator  Scissors/Razor Blade How to Complete an Upcycled Old Window Using Using Transfers Sand the frame of your old wood window, measuring the best for your transfer size, and remove all the loose debris. Clean your glass window with windex on both sides.  Trick to help your transfer really pop is to paint a white coat on the backside of your window to allow for your transfer to easily be seen. Not necessary, but I like this step! Seal the wood window frame with Dixie Bell Satin Clear Top Coat. Dry completely. Clean up your window to remove all dirt, debris, excess just in case any more got on there.  Determine where you want to add your transfer by measuring and playing with placement to create a good visual before you start the craft. Remember to use those grid marks to help you be successful.  Once cut, carefully remove the backing, nice and slowly. Be sure that it does not touch itself, or it will be ruined.  Do your best to lay it down on your glass because once it touches, it is on. Use your Prima Tool to help you firmly press the transfer to the glass.  Slowly remove the clear film backing from your transfer. Use that backing to help burnish it a bit by rubbing all along the glass to make sure it is touching the surface everywhere. Use your finger too. Apply the middle section and bottom sections of your transfer by carefully measuring, trying your best to keep it all lined up. Trim first to help you line it up with ease. Repeat steps 9 and 10 to complete. Do not worry about sealing your transfer. Prima advises against it. You can add a little tan paint on the inside of your sides on your glass to help tie it all together. This will also help to hide any blemishes.  Since I had a bit of a gap on the bottom, I will consider adding a few other floral transfers cascading down in that open space to help finalize it all.  Where can I dispaly my upcycled window with transfers? Y’all the question should be where can’t I decorate with this beauty? This would look great in your home on an open ledge, a mantle with a tall space up above it, on a bathroom wall, with a beautiful vase with seasonal flowers, and even in a guest bedroom with a comforter accenting those pops of colors from the florals in the transfer. Just have fun wherever you put it and know that it is simply gorgeous no matter where it ends up.   Is It Easy To Stack Transfers on Top of Other Transfers? Yes! I do this all the time. Some transfers are so pretty by themselves. But when you add a little more, they become out of this world beautiful. Just remember when working with transfers, be it the first layer or the second, be careful not to let it touch anywhere. Once you have removed the backing, you better be ready to go! Trust me from experience. Once it sticks, it sticks!  Just pin this How to Complete an Upcycled Old Window Using Using Transfers tutorial below to find the instructions later!

Tammy Huls 2