Doing your own corner display case makeover allows you to incorporate your personal style while also saving you a ton of money! Hands down, a painted display cabinet is one of the most fun pieces of furniture to makeover because it’s extra storage that can either be a statement piece or blend into the background. Corner Display Case Makeover I have had this old cabinet for quite some time. Do you have an old cabinet that you’re not sure what to do with? Maybe you don’t even know where to start. Don’t worry, I’m here to help. In this post, I’ll teach you how I gave my old display cabinet a makeover. I’m absolutely thrilled with the results of this budget-friendly DIY Corner Display Case Makeover, if you’d like to try it for yourself then keep reading for a step-by-step tutorial with details on how we achieved this makeover. supplies to makeover your corner display case: Used display case Paint (coal black) Paint brush Container to decant your paint Instructions to makeover your corner display case: Start with your display case. Remove your hardware. Prep your wooden display case. Decant your paint into a separate container and paint your display case. Make sure to paint 2 coats or until it is fully coated. Frequently Asked Questions: Can you paint over the old cabinet paint? Painting over painted cabinets requires good prep work. Before you begin, the surfaces of the cabinets need to be roughed up. This will help the paint to adhere to the surface of the cabinets. Use a sanding block or sponge and go over every surface, corner and groove of the cabinet. Why Do You Want To “Rough Up” the Wood? Roughing up the wood, with a sanding block or anything gritty, is so important for many reasons: It removes any finish that may be on your wood to begin with to give it a clean base to start It helps removes any scratches or tiny dents to give a more even surface Most importantly, it allows the new paint to adhere easily. Just pin this corner display case makeover tutorial below to find the instructions later!
Stencil on metal and create your own projects in little to no time. Follow along as I teach you all the tips and tricks that you need to know. To stencil on metal is so simple, and similar to any other stencil project. There are some pretty budget friendly stencils and you could easily complete a few of these projects, from start to finish, in less than an half an hour? Doesn’t all of that sound a little too good to be true. So once you have the the metal, the paint, and the stencils, you are ready! I am so glad that you are here with me as I share my tips and tricks for how to stencil on metal! Let’s get started! How to stencil on metal The technique of stenciling onto metal is SOOO simple. I can’t say enough about stencils. So many options and designs out there to allow you to create anything you want based on your own personal style. They are so much fun and a really easy way to add a new flair to any piece of furniture. I have been using stencils for a long time. Which has allowed me to be able to try out lots of different tools and paints over the years. When it comes to stenciling it is a skill that over time comes naturally and with time you can honestly do it with your eyes closed. Well, not really but it does become super easy once you find the right tools, paint, and stencils. I promise you with the right tools and paint you will be stenciling like a pro. Supplies to stencil on metal: mineral paint Paint Daubers Stencils Number Stencils metal pail Paintbrush A fine sanding block Heat Gun Instructions on how to stencil on metal: Take your metal pail.. Determine which stencil to add on top of your pail. Lay your stencil down on your pail, tape it down paying attention to the sides and spacing. Always have a visual plan before you start adding your paint. With your pouncer, begin to press your paint gently into your stencil in the desired areas you choose. Once you are done filling in the stencil, pull it up carefully. If by chance you go over a bit, you can use a baby wipe to help you clean up that area while it is still a bit wet. Use your blow dryer to dry the paint. Repeat the same process on the other side of the pail. Use a paint brush to touch up if needed. Sand over the paint slightly. Take your wooden block again. Determine which stencil to add to the other side of it. Lay your stencil down, paying attention to the sides and spacing. Always have a visual plan before you start adding your paint. With your pouncer, begin to press your paint gently into your stencil in the desired areas you choose. Once you are done filling in the stencil, pull it up carefully. Frequently asked questions: What paint should I use when using Stencils? Naturally, I typically use whichever paint is the closest to me, but in all honestly, I start with finding the right color I want for my project. If I had to pick a brand that is my favorite to use when stenciling I would say it is Master’s Touch acrylic paint from Hobby Lobby. You will find it in the art department. I love it because it is thicker and creamier than a lot of other craft paints. Some people, like my best friend from high school who is a lifelong crafter, will say to use the more runnier stuff. She loves it but I do not. I think a lot has to do with what you love and what you started off using and are comfortable with. For more on this check out this post. Just pin this how to stencil on metal tutorial below to find the instructions later!
Don’t throw out that old door just yet! Learn how to repurpose an old door into a beautiful bathroom wall decor piece, that you will just love hanging on your wall! Do you have an old door sitting in your garage or basement that you don’t know what to do with? Why not repurpose it into a beautiful new piece of decor for your home? With a little bit of creativity and some DIY skills, you can turn that old door into a gorgeous wall decor for any room. Check out this amazing idea for inspiration! Repurpose an Old Door Do you have an old door lying around that you don’t know what to do with? Well, look no further! In this blog post, I will show you how to repurpose that old door into a beautiful and unique piece to decorate your home with. I have had this old door for quite some time. So long that my husband took it back to the garage and it got buried under some times. I asked him to go and locate it so I could finally get around to making the bathroom wall decor I had been dreaming of. If you are like me and have TONS of projects you are wanting to get done now is the time to do them. You will not regret taking the time to make something old into something new. So gather up your supplies and pull that old door out of the back of your garage or basement and let’s get started! Supplies: Old Door Polyurethane Drill Screws Wire basket Towel Hook Steps: Prep your door first by cutting the door in half, or in the best place possible to work with. Continue to prep your door by wiping it down and sanding it. Get all the excess dirt and splinters off. Scrap the door and then sand it. This makes Once your door is sanded and clean apply a coat of fast-drying polyurethane coat over it and allow it to dry. Gather some baskets and antique hooks and work with placement on where you wish to put them. Gather some baskets and antique hooks and work with placement on where you wish to put them. Choose what you wish to have on yours. You don’t have to stick with the ones I choose. Ideas on How To Repurpose an Old Door There are lots of different things you can do when repurposing an old door. Instead of adding items like I did above, you could paint them and stencil sayings on them. You could even decoupage the inner parts to add some floral designs. The possibilities are endless when it comes to decorating with an old door. Get your thinking caps on and just use your creativity to make something old into something new for your home. What Can I Make Out of an Old Door? If you are wondering what do you do when you have an old door lying around and you’re not quite sure what to make of it? Well, never fear, because I’ve got some ideas for you! Make shelves coffee tables headboard for a new bed Wall shutters Jewelry Stand Dressing screen Really any idea is perfect for crafters of all levels. So get creative and see what you can come up with using an old door. You might be surprised at just how versatile they can be! Just pin this How to Repurpose an Old Door tutorial below to find the instructions later!
Finding some simple and easy DIY home decor ideas can really be a blessing. When you are wanting to change up some of your home decor and need it to be on a budget then try these DIY decor tutorials, I am positive you will love them! If you’re like me, you love to decorate your home but don’t always have the money to buy everything you want. Here are some DIY home decor ideas that will help cheer up your space without breaking the bank. DIY Home Decor Ideas I love seeing uplifting quotes and sayings in my home. They bring me so much joy and really help me have a positive attitude throughout my day. If you too love that, then these DIY home decor signs will be perfect for your home as well. When you are needing to change up your decor, you can simply make that change using some stencils, floral transfers, and a little paint. I have lots of signs that I change out throughout the year. That gives me a new look when I am wanting, and more decor items to rotate. The best thing about these DIY wood signs is they can even be used on tiered trays, cocoa bars, mantels, and coffee tables. You can find many different ways to style and decorate wood signs. Give this tutorial a try and you too will see that the possibilities are endless when it comes to some stencils, floral transfers, paint, and wooden blanks. How to Use Floral Transfers and Stencils to Make a Sign Supplies: Wood Blank, Cabinet Door, or Window Stencil with Words or Quote Vigorous Violet Floral Transfers Transfer Applicator Acrylic Paint Jumbo Daubers Sanding Block Scissors Steps: Spread out your vigorous violet floral transfer and cut out each floral design that you want to transfer. Cut out any elements you don’t want to use. Align the stencil over the floral transfer paper to find the right placement. Trim the extra off. Pull off the backing and be careful that it doesn’t fold over and stick to itself. Stick the floral transfers onto your sign backing and use the transfer tool to press the design onto the backing. Pull back the top layer to make sure it is sticking. Remove the top layer and sand any excess off the edges. Place the stencil on top of the tile and use your deep purple paint and user your dauber to dab into the words. Take the purple flower you cut out earlier and remove the backing. Place in the lower left-hand corner and use your transfer tool to transfer it onto your sign. Pull off the plastic to make sure the transfer worked. Trim the bottom and sand the extra on the edge. How to Use Floral Transfers and Stencils on an old Window or Cabinet Door Supplies Old Window or Cabinet Door with Wooden Frame Cosmic Roses Floral Transfer “Smile” Quote – Stencil Fusion’s Bayberry Paint Master’s Touch Acrylic Paint Transfer Tool Jumbo Dauber Heat Gun/Blow Dryer Scissors Steps: Remove the knob on your window with a screwdriver from the back. Clean the glass with glass cleaner. You can also paint the back of your window to make it all pop! I painted mine Fusion’s Bayberry. Pick which floral transfers you’d like to use on your window and cut them out with scissors. Pull the backing off and don’t let it come in contact with itself. Place on the glass and cut off any extra to fit. Use a transfer tool and press it out to adhere to the glass completely. Pull off the sticky top and push down any transfers that didn’t release and adhere to the glass. Push out any air bubbles. Once you’ve added your floral transfers, if you want to add any extra transfers to the piece, just cut out from your paper and repeat the same process to adhere the transfer to the glass. Be careful not to scratch any previous transfers. Place the stencil onto the glass where you would like it. Use the dauber to dab your paint into the words. Remove the stencil and wipe off any extra paint. Use the blow dryer or heat gun to dry. Place the stencil back onto the glass where you previously painted and offset it just a little. Use a white paint to go over the letters and make them pop. Just pin this DIY Home Decor Idea tutorial below to find the instructions later!
Follow along step by step as I show you how to to make a decorative tray out of a plain old cutting board or any piece of wood. This tutorial will make you think twice about any old piece of furniture after you see what I did. As we all already know there is not a piece of wood that I don’t love. I am sure you are wondering why. Well, because I can make adorable DIY trays out of any piece of wood or even a cutting board like in this tutorial! I just absolutely love being able to create my own home decor exactly how I want it. I bet you feel the same as I do. Or else, why would you be here? How to Make a Decorative Tray To me, there is always something pretty to create from repurposed wood or even furniture. This DIY project is simply painting it, adding stencils, a transfer and handles. Yep… you read that right. It IS that easy. There are so many possibilities to make this unique piece. So if you are like me and love to make new things out of anything, then this project is perfect for you. The beauty of this tray project is that you get to choose what fits your taste best by finding the perfect transfer and stencils. Maybe florals and French script aren’t your thing. No problem. Choose whatever your heart desires. That is just fine. You do you, and just remember that whatever you create, is awesome! The steps are the same no matter your style. Have fun with it, from start to finish. What you need to make your decorative tray: An old cutting board Fusion white paint Algonquin paint Black paint Paint daubers Paint brush Blow dryer A French script stencil A fine sanding block Family over everything stencil 2 x tray handles Floral transfer How to make your decorative tray: Start with your cutting board and paint it white. Use a blow dryer or heat gun to speed up the drying process. Paint another layer of paint onto the cutting board. Use your blow dryer again to dry it faster. Determine which stencil to add on top of your wood piece. Lay your stencil down on your board, paying attention to the sides and spacing. Always have a visual plan before you start adding your paint. With your pouncer, begin to press your Algonquin paint gently into your stencil in the desired areas you choose. Once you are done filling in the stencil, pull it up carefully. If by chance you go over a bit, you can use a baby wipe to help you clean up that area while it is still a bit wet. Use your blow dryer to dry the paint. Take your sanding block and buff at the script. Take some more white paint and lightly brush the script to fade it. Use your blow dryer to dry the paint. Determine where you are placing your floral sticker. Add your sticker to your board. Determine which stencil to add on top of your wood piece. Lay your stencil down on your board, paying attention to the sides and spacing. Always have a visual plan before you start adding your paint. With your pouncer, begin to press your black paint gently into your stencil in the desired areas you choose. Once you are done filling in the stencil, pull it up carefully. If by chance you go over a bit, you can use a baby wipe to help you clean up that area while it is still a bit wet. To complete, add your handles to your tray. How to apply a transfer? Have you ever seen a really cute saying or graphic and wished you could put it on everything? Well, there’s good news: with a little bit of patience and some basic tools, you can apply transfers to basically any surface! In this how to apply a transfer tutorial I will show you how it’s done. So go find your perfect transfer, and let’s get started! How to use a stencil? I just love using stencils when it comes to crafting and making home décor. I get asked a lot what are the best stencils to use and also how to exactly use stencils in different projects. In this this post I share all the tips and tricks I know with you when it comes to how to stencil. Just pin this DIY decorative tray tutorial below to find the instructions later!
When I get new supplies in, I get so excited. Just plain giddy, really. I just have to craft with them as soon as I can. These projects are the direct result of new, amazing decoupage papers that arrived at my home last week. So naturally, I would want to share these easy DIY projects with you as well so you can have fun too! Are you ready to learn how to use decoupage paper? Make your Wood Signs Using Decoupage Paper Y’all, why is learning how to use Decoupage paper so important in your crafting skills bank? Well, let me tell you! These wooden signs are super cute, simple home decor. What makes decoupage even more special are ALLLLLL the ways you can work with it. After crafting these signs, you should consider using this strategy to refinish an old side table. Maybe you could even redo the drawers on a big dresser for a fresh new room makeover. So many ideas, but still the same simple steps. These wood boards, of all sizes, are so easy to work with in terms of DIY home decor. The best part of this project is that it is completely customizable. You decide the style of design, size, colors, and shape for your wood sign. The hardest part is deciding which paper to use, because man oh man, they are all so awesome. Whether it is raw wood or painted wood it doesn’t matter. A transfer sheet of florals or vintage numbers… also no big deal. You decide what fits your home decor best to get this project started. I love being able to create something for any space in my home with just a little bit of time, creativity, and desire. You will too. And with these steps, you will see just how easy it is to get this same look in less than an hour. Are you ready to get to work? Supplies: Blank piece of wood any size – either raw or painted wood Decoupage Paper – Roycycled Mod Podge Paintbrush Sanding Sponge Heat gun Sponge Daubers Minwax Polyurethane Spray How to Use Decoupage Paper Grab your piece of wood, raw or painted, and your style of decoupage paper. Based on the size of your wood, will determine how much you will use of your paper and Mod Podge. Place paper over the top of your wood to determine the amount of paper you need to cut from the main sheet. I don’t measure, but you can. You just need enough to cover the entire board with a bit of overhang. For your bigger pieces of wood, you might not even need to cut your paper at all. Apply a nice even coat of Mod Podge. Be sure to go all the way to the edges. Completely cover the top of your board. For larger boards, you will need to work in sections, starting from the top, working your way down. Next grab the piece of decoupage paper you like, playing with placement before you lay it down officially. Remember, once it touches, it is very difficult to pull back up, so make sure you have it where you want it! Place it down, rubbing smoothly with your hands to push out any air bubbles. Make sure it completely adheres to the wood.Larger boards, you will repeat the addition of Mod Podge, applying paper, and smoothing out air bubbles in sections as you work to complete your wood sign. Let dry completely before removing the excess tissue paper with a sanding sponge. Simply rub along the edges to easily pull off excess. Grab your paintbrush and Mod Podge, and apply a thin coat on top to seal it up. Remember to keep your brush strokes all going the same direction. Let dry completely. What If My Wooden Sign is Not Super Smooth? Wood scraps are almost always not super smooth, and when working with these decoupage papers, you really want to find a piece as smooth as possible. But you can always take away the rough texture with a sanding sponge to help. You want your decoupage paper to really adhere to the wood. So, be sure to get full coverage of your Mod Podge on your board. You want it to really soak into those grooves. These projects are easy, and mistakes happen. Believe me. But I know you can always disguise a mistake in some way. So just be brave, try, and have fun. What if I Didn’t Measure Right and Now an Edge is Showing Through? Y’all I can’t tell you how many times I have done this. Well, because I told you before… I don’t measure. I like to eyeball my projects and most times that is just fine. But every once in a while, it is not. When that happens, I simply disguise it by “dirtying” up that edge of my wood sign by lightly rubbing a black ink/paint sponge along the edges. You can make the line as thick or as thin as you want. This will also give it a more finished look so that little mistake turned out to be a blessing. Working with decoupage paper is so much easier than it looks. These steps are so simple. Here is the abbreviated version for y’all! Pick wood. Pick paper. Paint if you want. Mod Podge. Place paper. Rub. Mod Podge. Dry. Decorate your home with this beautiful new DIY decor! HA! So simple and so cute. Let me know what you think! Just pin this How to Use Decoupage Paper tutorial below to find the instructions later!
Stencil your own projects to make your own home decor in little to no time. Follow along as I teach you all the tips and tricks that you need to know about stenciling a wood sign. Stenciling Your Own Projects To stencil, your own projects are so simple, and can actually be a bit sassy. Hence the stencil, “We Don’t Hide Crazy.” HA! They are also pretty budget friendly. And did I mention how you could easily complete a few of these projects, from start to finish, in less than an hour? Doesn’t all of that sound a little too good to be true. So once you have the wood, the metal, the paint, and the stencils, you are ready! I know I am ready to teach you. I am so glad you are here with me as I share my tips and tricks for getting this look for your own desired space wherever it may be. Let’s get started! Learn to Stencil Your Own Projects So many pieces of wood/metal and so many stencils that are just screaming for you to show them some love! And I am here to give you that little bit of encouragement to love them. I am happy to inspire you to work with them. I am excited to teach you step by step how to properly take that piece of wood/metal and a fun stencil from boring to beautiful in little to no time. Painting and stenciling projects is such a simple way to dress up any space in your home, office, camper, classroom, WHEREVER! Follow along as I walk you through this customizable DIY craft that will leave you excited to make many, many more! Picking the perfect paint color for your base coat and your accent color is the easy part. The hard part is determining which exact stencil you love the most. Believe me, when I say, there are just so many great stencil options out there to choose from. Don’t worry though, once you have become a master at painting and stenciling your own signs, you won’t want to stop. So if you happen to make one for every room in your home with just a piece of scrap wood or metal tin, that is fine. These projects make perfect gifts for friends and family. So you can keep on painting and stenciling for as long as you want! Are you ready to give it a try? Grab your supplies and let’s go! Supplies: Wood board panels Metal Tin “Number Stencils” Stencil “God Bless America” Stencil “We Don’t Hide Crazy” Stencil “I Pledge Allegiance to The Flag” Black, Tan, White, Gray for base coat Master’s Touch Acrylic Paints – Black, Warm Gray, Titanium White, Dark Brown, Red Dixie Bell Satin Clear Top Coat Sander How to Stencil Your Own Projects Grab your wooden board scrap wood and apply a base coat, covering completely. Don’t forget your sides to give a finished look. You can stain your wood or leave raw, if you prefer this look instead. Use a blow dryer or heat gun to speed up the drying process. Determine which stencil to add on top of your wood piece. Once dry, grab your desired color(s) for your stencils by squirting on a plate. Lay your stencil down on your board, paying attention to the sides and spacing. Always have a visual plan before you start adding your paint. With your pouncers or finger daubers, begin to press your paint gently into your stencil in the desired areas you choose. If you are adding multiple colors to your sign, determine which colors to add first and complete all of those desired sections before moving on to your next color. Once you are done filling in the stencil, pull it up carefully. If by chance you go over a bit, you can use a baby wipe to help you clean up that area while it is still a bit wet. If you want to add some texture detail to the sides of your sign, simply sand a bit or add some black edging with your paint dauber. To complete, spray your board with a minwax polyurethane spray. Certain thin wooden signs can have 2 holes drilled up top so you can add twine to allow for these stenciled signs to be hung. This makes it so they are not just resting on a mantle or bookshelf. Don’t you just love options? How to Add a Stencil to a Metal Tin Keep your patina look or paint if desired. I like it as is personally. Tape your “God Bless America” stencil in place, since it is on a curve using blue painter’s tape. With your pouncers or finger daubers, begin to press your dark brown paint gently into your stencil phrase on your metal tin. Use a blow dryer or heat gun to speed up the drying process. Once you are done filling in the stencil, pull it up carefully. You do not have to apply a sealer over the top of the metal. Do You Have To Tape Down Your Stencils? Y’all I do not ever tape down my stencils when I am working on a flat surface, because I like to cheat as I am stenciling. Sneaking a peak as I add the paint lets me know if I need to continue or make any changes while I am crafting. But when working on a round surface like this metal tin, I used tape to keep me straight and sturdy throughout the process. Sometimes a little bit of tape is a good thing. What Are the Must Have Colors to Have to Stencil my own sign? If you have been here for a while, you know I am a neutral kind of gal, through and through. So my answer to this great question is super easy. Neutral colors are my jam! I use dark browns, black, white, and grays in multiple shades for most of my projects. That does not mean you have to. From time to time I will pop in some bold funky colors, and I promise they turn out just as cute! I like Ocean Green and Lake Blue from Master’s Touch at Hobby Lobby for a beachy vibe. Just have fun and be creative whatever you decide. The best part of stenciling is if you don’t like it, just paint over it and try again! These crafts are pretty forgiving, and customizable projects which makes them so wonderful. Wouldn’t you agree? Just pin this how to stencil your own projects tutorial below to find the instructions later!
DIY wood signs with stencils are easy. Also, the possibilities are endless which I love! So check out exactly how I made these cute, fun, and simple DIY woods signs for home. Looking for a unique way to spruce up your home décor? Why not try making your own wooden sign! This easy tutorial will show you how to make a simple sign or two using just a few supplies. So, gather up your crafting supplies and get started today! You’ll be able to create a one-of-a-kind piece that will add some personality to your home. DIY Funny Wood Signs DIY wood sings are such a great way to show some personality in your own home. I love that when I find a stencil that will be the best fit for my own home. It really makes my DIYing SOO much more fun. With these stenciled signs I made today I just know that they will be the perfect addition to my walls, or to even sell in the store. Supplies: Wood Board Black Paint “This is My Circus” Stencil “This House is Protected by” Stencil Daubers Paper Towels How to make your own DIY Wood Signs For The Home Home Wood Sign #1 Using a floral transfer cut up the flowers you wish to use and rub the floral of your choice onto the corner of your board. Make sure it is nice and applied. Then using the same floral transfer sheet pick another floral you wish to use and adhere it to the top left corner. Repeat the same method we used for the bottom left corner. Lay your stencil wording of choice down on your board. Use your dauber and pounce black paint over your stencil wording. Once you are done cover your words then slowly peel your stencil up. Distress the edges with some black paint Home Wood Sign #2 Using “This is my circus & these are my Monkies” stencil lay it on a piece of wood of choice. Pounce your black paint over the stencil you have laid down, using your pouncer Check and see if your paint is heavy enough before you get through too much of your stencil. Pull the stencil away slowly and touch up any empty space on letters that need it. How To Add To Stencil Wood Signs If you are looking for a few extra touches to add to a stenciled wood sign for your home you can always add some twine to the sign as a way of hanging it. I also have seen where you can glue a bow to the middle as well. Be creative and see what your creativity brings to your stenciled wooden signs. Just pin these DIY Wood Signs for the home tutorial below to find the instructions later!
Follow this tutorial to learn how to make your own rustic decor by learning the technique of using tissue paper to decoupage a wooden toolbox. Y’all know of my love for the Farmhouse look in my decor. My whole house is covered in it. Well, I have really started to open my heart a bit and take a chance on a new style. Lately, I have really been into the Industrial Grungy looking stuff. There is just something about it. I think it is because it still has the natural vibes of Farmhouse, but a bit more masculine feel. And this DIY Decoupage Wooden Tool Box is too great not to start loving the Industrial look. Don’t you agree? How To Decoupage your Own Wood Toolbox This wooden toolbox is pretty awesome on its own, but I had a vision. And it’s not wise to stop a woman when she has a vision. Am I right, y’all? Using just a bit of Soft Matte Gel and this decorative decor tissue paper helped my vision become a reality. This DIY craft was so simple! Just because it is a tool box, doesn’t mean it has to have that masculine vibe. I just happen to love that look right now. But I’m here to tell you that if you want to make this with a different style to match your home decor, that is just fine. If you hope to keep its overall function as a wooden toolbox, you can do that too! You can accomplish both with any style of paper you select! You just have to be willing to do it! I’m here to teach the process to create it, step by step. Ultimately though, you have the opportunity to complete it in a way that best fits your style. So whatever style that might be, go and grab your supplies. I’m so excited to teach you how to make your own Wooden Tool Box using this awesome technique of Decoupage. If you want to have a rustic look in your home or office, then follow these steps below to get started! Supplies: Old Wooden Tool Box Decorative Decor Tissue Paper – “Science Lovers” (Your choice for design) Soft Matte Gel White paint Paint Brush Sanding block Flat edge applicator tool How to Decoupage Your Wooden Toolbox Grab your old wooden toolbox, Soft Matte Gel, and decorative tissue paper of your choosing. Wipe wood clean of any grit or grime. Lay your paper on your wooden toolbox and determine where you want the images to rest best. Trim your paper with scissors for the amount to cover a side. Leave some excess. Apply a thin layer of your soft matte gel directly to your wooden toolbox. Carefully apply an even coat covering the entire area you wish to add your paper. Be extra careful as you add your tissue paper since this paper is so fragile. Do not let it accidentally hit in a spot you don’t want it to remain. Next, apply your decoupage tissue paper. Press firmly and smooth out any air bubbles as it adheres to the wood. You can use parchment paper or wax paper to ensure every part is adhering perfectly. Be careful! Let dry and sit overnight. Once completely dry, grab a sanding disc to rub off any excess of your tissue paper. Next, use your sanding block to smooth the sides of your paper on the edges of your wooden crate. Wipe clean of any debris. To seal this project, apply a thin coat of your Soft Matte Gel directly on top. Apply evenly. Let sit to dry when complete. What is the Difference Between Decorative Tissue Paper and Decorative Decor Tissue Paper? The tissue paper that we shove into gift bags is extra fragile, right? Well, so is decorative tissue paper, friends. Your fingernails can snag it so easily, so you have to be extra careful when working with it. That is not the case when working with Decorative Decor Tissue Paper. That style of paper is much more sturdy and easily shapeable. I love how forgiving it is, and sometimes y’all when I craft, I make some mistakes. And I love those happy little accidents. You should too! Can You Paint the Wood Underneath? With this project, I did NOT decide to paint the wood underneath. I wanted to keep the wood grain showing through on my decoupage paper to help maintain the industrial vibe I was going for. But, if I was looking for a more shabby chic design, then yes. I would have selected a different design/pattern of decoupage paper to really pop on my wooden surface. So in that case, I would totally paint a coat on my wood. I would remember to let it dry completely before applying my decoupage paper. But all the other steps would remain the same. The fun thing about decoupage paper is that the options are endless when it comes to creating your own DIY projects. Just pin this How To Decoupage your Own Wood Toolbox tutorial below to find the instructions later!
Making your own DIY Breast Cancer signs is a wonderful way to show your support to anyone who needs some hope in their lives. With this step-by-step tutorial, you can make your own signs as a reminder to give hope to a loved one or yourself. DIY Breast Cancer Signs Making a Breast Cancer sign that brings awareness to breast cancer and is simply beautiful too, is just plain awesome. I can’t get enough of these pink shades and messages of hope! Crafting these with that someone special you know in mind, makes them even more special. Whether you or someone you love is a current fighter or a proud survivor, this DIY project is for you. You only need a few things to make this look! Grab some pieces of wood, some paint, some stencils, and these beautiful transfers to get started. To see exactly what I did to make these adorable and meaningful signs, check out my tutorial below. In under an hour, you will have 2 new signs to decorate your home with or give as a gift to someone needing an emotional uplift. Make your Own DIY Breast Cancer Sign I miss my grandma every day. And when I craft these, I think of her. She was beautiful and always had hope. She always was able to brighten my days because she was so special. These signs help her spirit live on for me. Using these big beautiful floral transfers, along with the stencils about hope, are perfect to brighten anyone’s day. I know they do mine. Being able to craft something so personal makes me happy. Determining which flowers to use, colors to paint, and stencil to apply makes these signs even more heartfelt. If you need this sign for your own home, or for a friend, check out the steps below. Supplies: Wood Board Panels Basecoat of your choice of color paint – Pink Heat Gun Master’s Touch Light Pink, Darker Pink & White Hope with Ribbon Hope Definition Stencil Flat edge applicator tool Lush Floral I Transfer by Prima Paintbrush Finger Daubers Minwax Polyurethane Spray How to Make A DIY Breast Cancer Wood Sign Grab your wooden boards and apply a base coat of pink paint. Dry completely. Use a blow dryer or heat gun to speed up the drying process. Once dry, play with the placement of stencils and transfer to create a visual plan on your first “HOPE with Ribbon” sign. Grab your pieces of floral transfer and apply them to your wooden sign. Use your flat edge tool to adhere to the wood. Be careful when applying your transfer because once it sticks it on there. Carefully remove your plastic backing slowly as you work. Next, let’s add the “HOPE with Ribbon” Stencil. Grab your desired color(s) for your stencils by squirting on a plate. I am using a slightly darker pink than my base coat to stencil first. You could leave it as is if you like the subtle look. With your pouncers or finger daubers, begin to press your paint gently into your stencil. Dry your paint before moving on to the next step. I want my stencil to really pop, so I am laying the stencil back over, shifted just a tad. Add some white paint on your stencil, leaving the pink ribbon alone. Go back in and add more floral and leaf transfers to fill in the opening up top. Repeat using the same steps as before to apply your transfer. Set aside to get started on your other Breast Cancer Wood Sign. Bring over your next pink board to begin adding your details. Determine which floral transfer pieces you want to add to your board – cut out from your main sheet. Remember to be careful to not let your transfer get ruined by touching anything with the back paper removed. For this sign I will build up my transfers a bit more by layering with the pieces up top on my board. Once you have created a visual representation of what you want your board to look like as a finished product, begin with your first transfer. Apply your transfer by resting in place, and pressing firmly with your tool so the transfer adheres nicely. Repeat as you stack all of your transfers on your board. Don’t be afraid to layer and have fun with it. Stack them around on your board. Feel free to snip and shift your transfers before you make a final decision as to where to lay them. To finish up, grab your “Hope Definition” stencil, and with your finger daubers add your darker pink paint first. Repeat the steps from above to dry, then reapply your stencil to add your next layer of white paint. Once finished with these signs, apply a spray polyurethane to help these cute signs to have a finished look. Do Transfers Always Need to be Sealed? The answer is yes and no! For these wooden signs, you should definitely seal these to give them a finished look. You worked too hard to have them not look extra fabulous y’all. I like to use whatever is hanging around my craft room if I am being honest. But what I use most to seal my projects is either Dixie Bell or the Minwax Spray Polyurethane. I DO NOT seal my transfer when applying them to the glass of an old window. Doing that will ruin the transfer. How Many Projects Can I Make with a Transfer Sheet Set? With this transfer sheet set, I have already made 5 projects and I am nowhere near using it all up. With these 2 Breast Cancer Wooden Signs, I was hoping it would help me dwindle down my stash. But, I still have so much leftover. That is why I love these transfers. You get so much product for your to work with. Creating wooden signs of all sorts of sizes is a cinch. Old windows look great with these transfers on them, as well. Oh, and these beautiful flower transfers would also look beautiful on any old piece of furniture you want to upcycle. So to answer that great question… the possibilities are endless! Too many to count! Just pin this DIY Breast Cancer Sign tutorial below to find the instructions later!
Learn how to turn your craft abilities into a little humor for home by making funny signs using stencils and paint that you will not be disappointed in. Y’all. If you like to giggle and craft, then this post is for you. I have a pretty big sense of humor and love anything that can make me smile. These DIY Funny Signs are just too cute and comical to not craft. They are bound to make any guest who stops by your home smile, and that is always my goal. You know you giggled when you read those signs. Don’t deny it! I will be honest. I didn’t love how thin these pieces of wood were when I ordered them. But I sure am loving them now. They are so thin and light that I can easily poke holes right in the top. Then all I have to do is simply attach some twine to be able to hang these cute DIY Funny Signs anywhere I want in my home. And don’t worry y’all, if you don’t have these exact pieces of wood, they turn out just as cute with any piece of scrap wood, some paint, and an adorable stencil. So if you want to create this look for your home too, grab your supplies, and let’s get started. Make your Own Funny Signs For Home So what do you think about these stencils? Aren’t they just so funny? They definitely bring a smile to my face! AND crafting with them to make a comical DIY for my own home, just makes them even more special. I decided to stick with my neutral color palette so it would fit in with the rest of my farmhouse decor. But you don’t have to! With a craft like this, you get to determine the size of your wood, the colors, and the amount of detail. The best part is I did it all with some supplies I have had on hand. (I ordered a big bundle of those wooden boards from Amazon.) Pretty great, right? Let me teach you how to create these signs from start to finish. Just check out these simple steps below! Supplies: Wood Board Panels Basecoat of your choice of color paint – light tan/cream & black “Please Excuse The Mess” Stencil “You Drink Too Much” Stencil – The Stencil Smith Finger Daubers Heat Gun Jute Twine Electric drill How To Make Funny Signs for home decor Grab your thin wooden boards and apply a base coat of paint. You determine the color(s) that works best for your decor. I went with a light tan for one and black for the other. But you do what looks best for your decor. Dry completely. Use a blow dryer or heat gun to speed up the drying process. Once dry, grab your desired color(s) for your stencils by squirting them on a plate. On our first DIY Funny Sign, carefully apply your stencil, “You Drink Too Much” in place on your board. I used my light tan board for this sign. With your pouncers or finger daubers, begin to press your paint gently into your stencil. I just used black for the letters for this sign. Once complete, gently remove your stencil. Add some dimension to your sign by running your finger daubers along the sides. To me, it looks a bit boring without it. Set aside. Bring over your next board. I painted my board with a black base. I used the light tan to add lettering with my stencil. Repeat the steps from above to add your next stencil, “Please Excuse the Mess” for your DIY Funny Signs Set. When dry, poke two holes into the tops of your boards using a tiny drill bit. Use a jute/twine/leather cord to pop through holes. Create a hanger for these DIY Funny Signs to be displayed in your home for all to admire. Should You Use Just One Color When Filling In A Stencil? For these signs, I did just use one color for the whole sign. But you do not have to! You can mix and match as many colors as you want. Since I prefer the more neutral colors in my home decor, I tend to stick to that color palette. But y’all do not have to do that. Just have fun and enjoy the entire crafting process, whatever it might be. ANNNNND, the beauty of a stencil is if you don’t like how it looks, no big deal. Just repaint and start from scratch! What To Do If Your Sign Looks a Bit Boring? Y’all! I am a fan of sweet and simple when it comes to some crafts. But I don’t ever want my project to look unfinished. That is why I love the distressed look so much. (Ha, that explains why I do it so often.) To get that look, just run a bit of black paint on your finger daubers along the edges of a sign. Don’t push too hard, as you are just adding a new dimension to your sign. Sometimes I even use a sander to roughen up the edges too. Just remember not to go too crazy when distressing friends. Let me know what you think of this technique. It is an easy way to boost your boring sign to something beautiful. See you next time! Just pin this how to make funny signs for your home tutorial below to find the instructions later!
Love the look of using a transfer to make your own floral window sign? Learn how to make your own using stencils with my step by step tutorial. This simple DIY window is a perfect way to spread awareness, all year long. Using these beautiful, big bold pink florals, and a stencil of HOPE will help to serve as a reminder. This craft is a beauty, not just in its looks, but in what it stands for as well. All you need is a few things for y’all to create this look. An old window, some paint color of your choosing, a stencil, and transfers. Oh and a little bit of time! What do you think? Want to make it? Then let’s get started. Check out how I did it step by step in my tutorial below. You will have your own DIY Breast Cancer Awareness Window in less than an hour. Breast Cancer Pink Floral Window Using Transfers I love to craft home decor that is beautiful, eye-appealing, and a statement piece. But I also love to craft something that is meaningful. It makes it even more special. Being able to select my own stencil and transfers allows me to personalize this sign exactly how I want it. Picking the paint colors and coordinating flowers will help this sign be a unique treasure for whoever is the owner. Can’t you just imagine how special it would be to be given as a gift to someone who is fighting a hard battle? It would also be great to auction off at a fundraiser surrounded by all those pink ribbons. I can also envision it as a lovely decor in your guest bedroom/bathroom. Follow these steps below to make your own Breast Cancer Window. Supplies: Old Glass Window Rust-Oleum 2X Spray Paint Blossom White Lush Floral I – Prima Transfer Hope Stencil – The Stencilsmith Sponge Daubers Master’s Touch Acrylic Paint Heat Gun Transfer Tool Paintbrush Minwax Polyurethane How To Make Your Own DIY Floral Window Using Transfers Prep your window by cleaning the glass on both sides. Apply a coat of paint onto the back of your glass. You determine the color you want to match your home decor. I selected white, but a pale pink would look beautiful too. Dry completely and then apply the 2nd coat. Dry again. Flip over your window and wipe any excess debris that may be on there. Paint the window frame if you choose. I kept mine the wood look. You decide what you like best. Determine which window stencils and Prima transfers you wish to apply. Play with placement based on the size of your window, transfers, and stencils. Cut out the transfers you need from your main sheet. Use a razor blade to help clean your window one last time to ensure your glass is nice and clean. Rest your pink floral rub on transfer directly onto the glass. Be careful as you place it because once it sticks, it is on there. Press firmly with the flat edge tool to help it adhere perfectly. Once applied, slowly peel back your plastic film to reveal your transfer. Go back and push down in spots that might need a little more pressure. Run your fingers over the transfer to ensure you have no air bubbles. Next, lay your HOPE stencil down on your window, paying attention to the placement. With your pouncers or finger daubers, begin to press your paint gently into your stencil. I used pink to tie into the flowers. Once you are done filling in the stencil, pull it up carefully. You can add a bit of white to help your letters pop, but I like the way it looks as is. Completely dry your paint with a heat gun before you add another floral transfer in your open areas of the window. Grab the perfect transfer that will fit best in your open space. Remember you can cut your transfers and layer them as well. I don’t like to waste, so little pieces work great. Just have fun with it and be creative. Add a bit of white paint along the inside of your window, resting right next to your frame. This hides any crooked cuts on the transfer. It also adds a new texture to the piece. Finally, spray your wood frame board with a Minwax polyurethane spray to seal, being sure not to get on the glass. To maintain the beauty of your window, use a Swiffer to lightly dust it. No water or Windex on the glass from now on! Do You Have to Paint a Color on the Back of Your Window’s Glass? In order to have your stencils/transfers really stand out, you should paint a coat, or 2, of a neutral color on the back of your window’s glass. You could decide you don’t want to do this step. That is totally fine. The color of your wall will show through if you don’t paint your glass. But I prefer painting the back to allow for the details to be really pop! Which style do you like best? What If I Make a Mistake While Applying My Transfer? Y’all! I do this all the time. And that is why I love working with these transfers. You might make a mistake by accidentally removing your plastic backing too soon. Or even pulling it off too quickly. No worries. Simply disguise it by applying another little transfer piece over the top. Can you even see the mistake I made on here with the leaf? I bet you can’t! You could also hide it with the stencils you apply, as well. Happy little mistakes can always be fixed, so don’t stress. Just pin this DIY Floral Window using Transfers tutorial below to find the instructions later!